MUXLAB Component Video/IR Pass-Thru Balun, a device that allows the transmission of component video signals (Y/Pb/Pr) and infrared (IR) signals over UTP (Cat5e/6) cables. It transmits high-resolution 720p or 1080p video, is capable of transmitting IR signals, and can support signal transmission for distances of up to 300 meters.
Muxlab MonoPro™ XLR, F, female connector baluns allow a standard AES analog or digital XLR audio channel to be extended via single Cat5e/6 cable within a professional audio environment.
MuxLab PC / Audio Balun (500030), allows an unbalanced line-level stereo audio signal to be transmitted via single Cat5e/6 cable in a point-to-point connection to distances of up to 5,000ft / 1.5km.
Component Video/IR Pass-Thru Balun 500055 allows one component video (YPbPr or RGB) signal and one IR emitter signal to be transmitted via one Category 5E/6 twisted pair cable for more cost-efficient cabling.
MuxLab Digital Audio Converter 500080, converts one LPCM-encoded Digital Coax (S/PDIF) or Digital Optical (TOSlink) audio signal to a standard left/right analog audio output (RCA).
Pass-Thru Balun που συνδυάζει βίντεο, remote power και 2-wire PTZ σήματα σε ένα UTP (Cat5) καλώδιο. Εξαιρετικά μικρό - κατάλληλο για εγκατάσταση μέσα σε dome κάμερα. Χρησιμοποιείται σε ζεύγη ή με άλλα CCTV baluns (500000, 500009, 500023, 500015). Μεταφορά σήματος έως 670m. Remote power έως 105m @ 24V AC.
Quad Video Balun, RCA, llows up to four (4) composite video signals to be transmitted via unshielded twisted pair (UTP) cable in a point-topoint connection.
Muxlab HD-SDI Balun-2 Pack, allows one HD-SDI signal to be transmitted up to 150 ft (45m) via Cat5e cable at HD resolution in a point-to-point configuration. The HD-SDI Balun supports transmission of up to 1.5 Gbps uncompressed, un-encrypted digital video (optionally including embedded Audio and/or Time Code) within television facilities and between professional video equipment.
MUXLAB Component Video/IR Pass-Thru Balun, a device that allows the transmission of component video signals (Y/Pb/Pr) and infrared (IR) signals via UTP cables (Cat5e/6).