Show AH300.4 Professional Class D, 4-channel amplifier with up to a total of 4 x 270W at 100V (RMS) and 100Hz - 15kHz (+0/-3dB) frequency response. This amplifier operates on both 70V RMS and 100V RMS, offering versatility in voltage options and making it suitable for various audio installations. The amplifier supports both balanced (20kohm) and unbalanced (10kohm) inputs, allowing seamless integration with a wide range of audio sources and also includes a slot in card for Dante (FSD-44D).The AH300.4 features efficient Switching Power Class D technology, ensuring minimal heat generation and higher energy efficiency.
Specifications
Power: CHA-D /CH1-8 70V(RMS) 300W x 2, (ONE Channel Drive) 100V(RMS) 300W x 2, CHA-D/CH1-8 70V (RMS) 270W x 4, (All Channels Drive) 100V(RMS) 270W x 4
Frequence response: 100Hz~15KHz(0+/-3dB)
S/N rate: >95dB
Input sensitivity: 0.9-1.1V (0+/-1 dBv)
Input Impedance: 20kΩ balanced ή 10kΩ balanced
Slot in Card for Dante (FSD-44D)
Inputs: Euroblock
Outputs: Euroblock
Power supply: 110 - 120V / 220-240V 50~60Hz
Rack: 1U
Dimensions (WxDxH): 483 x 360 x 44mm
Weight: 6.2kg
Specifications
Category
Power Amplifier 100V
Frequency Response
100 Hz - 15 kHz
Channels
4
Inputs
Euroblock
Outputs
Euroblock
Protective Cirquits
Short Circuit / Open Circuit / Thermal / Ultrasonic / RF
Show AH500.1 Professional Class D installation, 1-channel amplifier with up to a total of 1 x 500W at 100V (RMS) and 140Hz - 14kHz (+0/-3dB) frequency response. It is suitable for both 70/100V line installations (selectable through dip-switches) and can be used for various audio installations.
SHOW AH150.2, a professional 2-channel Class D amplifier delivering 2 x 135W at 100V and 70V, with up to 150W output when operating a single channel and a frequency response of 100Hz–15kHz.
Show AH300.1 Professional Class D, 1-channel amplifier with up to a total of 1 x 300W at 100V (RMS) and 140Hz - 14kHz (+0/-3dB) frequency response. This amplifier operates on both 70V RMS and 100V RMS, offering versatility in voltage options and making it suitable for various audio installations.
QSC MP-A40V professional four channel amplifier with up to a total of 4 x 200W at 4Ω/8Ω and up to 200 watts into 70V or 100V loads. The MP-A40V incorporates FlexAmp Technology that allows each pair of amplifier channels to deliver up to 400 W total power, in any ratio.
Show AH300.4 Professional Class D, 4-channel amplifier with up to a total of 4 x 270W at 100V (RMS) and 100Hz - 15kHz (+0/-3dB) frequency response. This amplifier operates on both 70V RMS and 100V RMS, offering versatility in voltage options and making it suitable for various audio installations.