Muxlab DIGITAL AUDIO CONVERTER (DAC) 500080

MuxLab PC / Audio Balun (500030), allows an unbalanced line-level stereo audio signal to be transmitted via single Cat5e/6 cable in a point-to-point connection to distances of up to 5,000ft / 1.5km.

Muxlab MonoPro™ XLR, F, female connector baluns allow a standard AES analog or digital XLR audio channel to be extended via single Cat5e/6 cable within a professional audio environment.

Quad Video Balun, RCA, llows up to four (4) composite video signals to be transmitted via unshielded twisted pair (UTP) cable in a point-topoint connection.

MUXLAB Component Video/IR Pass-Thru Balun, a device that allows the transmission of component video signals (Y/Pb/Pr) and infrared (IR) signals via UTP cables (Cat5e/6).

Muxlab MonoPro XLR, M, male connector baluns allow a standard AES analog or digital XLR audio channel to be extended via single Cat5e/6 cable within a professional audio environment.

Muxlab HD-SDI Balun-2 Pack, allows one HD-SDI signal to be transmitted up to 150 ft (45m) via Cat5e cable at HD resolution in a point-to-point configuration. The HD-SDI Balun supports transmission of up to 1.5 Gbps uncompressed, un-encrypted digital video (optionally including embedded Audio and/or Time Code) within television facilities and between professional video equipment.

Component Video/IR Pass-Thru Balun 500055 allows one component video (YPbPr or RGB) signal and one IR emitter signal to be transmitted via one Category 5E/6 twisted pair cable for more cost-efficient cabling.

Muxlab IR Emitter, works in conjunction with MuxLab products to support IR source control between the AV source and the AV display. The 500998 connects to an active balun transmitter. Suitable for IR data format: NEC code, RC5 code, RC6 code, Grunding code, RCA Code, Zenith code and Sony 12-bit code Carrier frequency: 38 kHz