QSC SPA2-200 professional two channel amplifier with up to a total of 2 x 200W at 4Ω/8Ω and up to 350 watts into 70V or 100V loads. Utilizing an advanced Class-D amplifier design and Universal Power Supply the SPA Series are amazingly efficient allowing them to be convection cooled and are ENERGY STAR® qualified with quiet auto-ramp standby functionality. Bridging the outputs of the SPA2-200 provide up to 400 watts into low impedance, and up to 350 watts into 70V or 100V providing outstanding flexibility. The SPA2-200 can be mounted in 1/2 RU reducing rack space requirements. In addition their clever joining brackets enable easy under-table and wall-mounting. Rack Mount 1U. Dimensions (WxDxH) 220 x 241 x 43mm - 1,4kg
Specifications
Stable at 2 Ohms
No
Category
Power Amplifier 100V
Power 4Ohms / channel
200 W
Power 8Ohms / channel
200 W
Power 100V
350 W
DSP
No
Signal to Noise Ratio
> 100 dB
Frequency Response
20 Hz – 20 kHz
Inputs
3.5 mm Euro
3.5 mm Euro Remote Connectors
Amplifier Type
Professional
Power Bridge 8Ohms
400 W
Channels
2
Power 4Ohms
400 W
High Impedance Output
70 V / 100 V
Amp Class
Class D
Sensitivity Inputs
1.23 V (+4 dBu)
Input impedance
>10 kΩ Balanced / >10 kΩ Unbalanced
Outputs
5 mm Euro
Protective Cirquits
Rms and Thermal Limiting, Over Current, Short Circuit, and Under/Over Voltage Protection
Main Voltage
240 V 50 - 60 Hz
Cooling
Convection
Indicators
Power Per Channel Signal / Per Channel Protect / Limit
QSC SPA2-60 professional two channel amplifier with up to a total of 2 x 60W at 4Ω/8Ω and up to 250 watts into 70V or 100V loads. Utilizing an advanced Class-D amplifier design and Universal Power Supply the SPA Series are amazingly efficient allowing them to be convection cooled and are ENERGY STAR® qualified with quiet auto-ramp standby functionality.
QSC SPA4-60 professional four channel amplifier with up to a total of 4 x 60W at 4Ω/8Ω and up to 125 watts into 70V or 100V loads. Utilizing an advanced Class-D amplifier design and Universal Power Supply the SPA Series are amazingly efficient allowing them to be convection cooled and are ENERGY STAR® qualified with quiet auto-ramp standby functionality.
QSC SPA4-100 professional four channel amplifier with up to a total of 4 x 100W at 4Ω/8Ω and up to 175 watts into 70V or 100V loads. Utilizing an advanced Class-D amplifier design and Universal Power Supply the SPA Series are amazingly efficient allowing them to be convection cooled and are ENERGY STAR® qualified with quiet auto-ramp standby functionality.
Professional powered audio amplifier 2 x 360W / 4 Ohm, 2 x240W / 8 Ohm. It has XLR and RCA inputs. The output connections are made with speakon, binding posts for bare cable and 6.3mm jacks. It can drive up to 4 8 Ohm speakers (2 speakers per channel) with parallel connection. Overheating, overload and short circuit protection. Ideal for any restaurant, hotel or club.
Crown XLI-3500 two channel power amplifier up to a total of 2 x 1000W at 8Ω, 2 x 1350W at 4Ω and 2 x 2700W at 8Ω in bridged mode. The XLI Series represents a new era in affordable, quality power amplification.
Metro PA-1300Q, professional 4 channel switching amplifier with up to 4 x 1300W at 8Ω, 4 x 2200W at 4Ω, and in bridged mono, 2 x 4400W at 8Ω, 2 x 4400W at 8Ω, 2 x 4800W at 4Ω. Frequency response is 20Hz-25kHz and is ideal for permanent installations.
Show D500.4L Professional Class D, 4-channel amplifier with up to a total of 4 x 480W at 4Ω (RMS), 4 x 240W at 8Ω (RMS), and bridged mono 900W at 8Ω (RMS) and DSP.
QSC SPA2-200 professional two channel amplifier with up to a total of 2 x 200W at 4Ω/8Ω and up to 350 watts into 70V or 100V loads. Utilizing an advanced Class-D amplifier design and Universal Power Supply the SPA Series are amazingly efficient allowing them to be convection cooled and are ENERGY STAR® qualified with quiet auto-ramp standby functionality.
