QSC RMX 2450a professional two channel amplifier with up to a total of 2 x 450W at 8Ω, 2 x 650W at 4Ω and bridge mode. RMX 850a clear and accurate sound is ideal for a hall, club or a house of worship. It has an independent DC and thermal overload protection on each channel which automatically protects amplifier and speakers. Signal and clip LED indicators are also available for monitoring performance. At the back, you can find screw terminal, 1/4, and XLR inputs, with Neutrik Speakon® and binding post outputs. Rack Mount 2U. Dimensions (WxDxH) 482 x 404 x 89mm - 20,2kg
Specifications
Stable at 2 Ohms
Yes
Category
Power Amplifier
Power 2Ohms / per channel
1200 W
Power 4Ohms / channel
750 W
Power 8Ohms / channel
500 W
DSP
No
Signal to Noise Ratio
>-100 dB
Frequency Response
20Hz - 20kHz
Power Bridge 8Ohms
1500 W
Channels
2
Power 4Ohms
2400 W
Inputs
XLR - 6.3 TRS - barrier strip
Amp Class
Class H
THD
< 0.02%
Sensitivity Inputs
1.23V (+4.0 dBu)
Input impedance
20KΩ
Outputs
Speakon / Binding Post
Protective Cirquits
Full short circuit, open circuit, tdermal, ultrasonic, RF protection. Stable into reactive or mismatched loads
QSC RMX 4050a professional two channel amplifier with up to a total of 2 x 800W at 8Ω, 2 x 1300W at 4Ω, 2 x 2000W at 2Ω. RMX 4050a clear and accurate sound is ideal for a hall, club or a house of worship.
Professional powered audio amplifier 2 x 360W / 4 Ohm, 2 x240W / 8 Ohm. It has XLR and RCA inputs. The output connections are made with speakon, binding posts for bare cable and 6.3mm jacks. It can drive up to 4 8 Ohm speakers (2 speakers per channel) with parallel connection. Overheating, overload and short circuit protection. Ideal for any restaurant, hotel or club.
Metro PA-1300Q, professional 4 channel switching amplifier with up to 4 x 1300W at 8Ω, 4 x 2200W at 4Ω, and in bridged mono, 2 x 4400W at 8Ω, 2 x 4400W at 8Ω, 2 x 4800W at 4Ω. Frequency response is 20Hz-25kHz and is ideal for permanent installations.
QSC SPA4-60 professional four channel amplifier with up to a total of 4 x 60W at 4Ω/8Ω and up to 125 watts into 70V or 100V loads. Utilizing an advanced Class-D amplifier design and Universal Power Supply the SPA Series are amazingly efficient allowing them to be convection cooled and are ENERGY STAR® qualified with quiet auto-ramp standby functionality.
Crown XLI-2500 two channel power amplifier up to a total of 2 x 500W at 8Ω, 2 x 750W at 4Ω and 2 x 1500W at 8Ω in bridged mode. The XLI Series represents a new era in affordable, quality power amplification.
Crown XLS-1502 Class D, two channel power amplifier up to a total of 2 x 525W at 4Ω and DriveCore technology and can drive 1550W at 4Ω bridged. XLS series got a makeover and delivers a powerful, pure sound experience for any venue.
Fenton FPL700 semi-professional, Class D, two channel amplifier up to a total of 2 x 250W Max at 8Ω, 2 x 350W Max at 4Ω with a built in MP3 Player (USB/SD), Bluetooth connectivity and remote control for convenient handling.
Crown XTi-1002 two channel power amplifier up to a total of 2 x 800W at 4Ω and 2 x 2000W at 4Ω in bridged mode and a built-in DSP. XTi Series is designed for demanding scenarios consisting large areas, delivering high quality sound with great power.
Professional 2 channel amplifier with up to 2 x 600W/4Ω, 2 x 700 W RMS at 2Ω, 1 x 600W/8Ω (Bridge Mode) and 1 x 1200W/4Ω (Bridge Mode) Balanced XLR outputs can be found at the back and Link Out for connection with other amplifiers. Speakon are used for connecting speakers
QSC RMX 2450a professional two channel amplifier with up to a total of 2 x 450W at 8Ω, 2 x 650W at 4Ω and "bridge" mode. RMX 850a clear and accurate sound is ideal for a hall, club or a house of worship.
