The AT-LP7X fully manual belt-drive turntable blends analog excellence with style and versatility. Featuring a dense MDF plinth and acrylic platter to minimise unwanted resonance and vibration, this elegant, matte-black turntable delivers sound thats just as clean and refined as its appearance.
In designing the LP7X, we paid special attention to chassis geometry, ensuring that the platter, spindle, and tonearm were optimally positioned for accurate, distortion-free tracking. The J-shaped aluminium tonearm, inspired by classic A-T models of the 1960s and 70s, features a dual-axis gimbal with precision ball bearings to further enhance tracking performance.
The turntable comes with our AT-LT10 headshell and AT-VM95E BK (black) cartridge with 0.3 x 0.7 mil elliptical stylus, providing excellent channel separation and low distortion for outstanding tonal quality. For easy customisation, the stylus can be replaced or interchanged with other styli in the VM95 line, offering a wide choice of options for every budget and application.
The AT-LP7X is ideal for those interested in experimenting with alternate cartridges. The tonearms VTA (vertical tracking angle) adjustment and 16 g subcounterweight allow you to use a broad range of other cartridges and headshells with a combined weight of up to 23.5 g. (A 32 g subcounterweight, available separately, enables the use of even heavier cartridge/headshell combinations.) With its built-in switchable phono pre-amplifier, the AT-LP7X also gives you the option of using MC (moving coil) cartridges.
The turntables 20 mm acrylic platter is driven by an optical sensor-monitored motor that ensures a continuously accurate platter rotation speed of 33-1/3 or 45 RPM. The motor is mounted on vibration-dampening rubber bushings designed to decouple the motor from the plinth, minimising the transmission of mechanical noise and oscillations. An external switching power supply isolates the AC-to-DC conversion to prevent it from adding any electrical interference, and the turntables spring-based, height-adjustable isolation feet offer excellent protection against external noise.
The AT-LP7X comes with a detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover.
Colour / Finish: Black Aluminium
Motor Type: Low-torque DC motor with speed correction sensor
Speeds: 33-1/3 RPM, 45 RPM
Built-in Phono-to-Line Preamplifier (Phono Stage)
Tonearm: J-shaped tonearm with adjustable VTA
Headshell: Detachable Audio-Technica AT-LT10 audiophile headshell, weighing 10 g
Cartridge: Supplied with a pre-aligned, specially specified Audio-Technica AT-VM95E Black cartridge
Wow and Flutter: <0.1% (WTD) at 3 kHz (JIS)
Signal-to-Noise Ratio: >60 dB
Pre-amplifier Output Level: PHONO mode: 4.0 mV nominal at 1 kHz, 5 cm/sec
Dimensions (W x H x D): 450.0 x 157 x 352.0 mm
Weight: 7.6 kg
Included Accessories:
1 x RCA cable with ground wire
1 x 45 RPM adapter
1 x Transparent acrylic dust cover
1 pair of gloves
